Subaru Robin Power Products RGV6100, RGV4100 service manual Rear Cover, Tightening torque 5.9 N-m

10-3-3 STATOR

(1)Put the stator in the rear cover setting the four grooves on the side of stator with thread holes of the rear cover.

(2)Attach the stator cover around the stator.

10-3-4 REAR COVER

(1)Put the rear cover with stator over the rotor. Tap on the rear cover evenly with a plastic hammer to press the rotor bearing into the rear cover.

(2)Fix the rear cover to the adaptor with four bolts, spring washers, and washers.

RGV6100

M6 x 160 mm bolt . . . 4 pcs.

M6 spring washer . . . 4 pcs.

M6 washer . . . 4 pcs.

Tightening torque

4.5 - 5.9 N-m

50 - 60 kg-cm

3.6 - 4.3 ft-lb

RGV2800 and 4100

M6 x 110 mm bolt . . . 4 pcs.

M6 spring washer . . . 4 pcs.

Tightening torque

4.5 - 5.9 N-m

50 - 60 kg-cm

3.6 - 4.3 ft-lb

(3)Attach the bushing over the lead wire drawn out from the rear cover. Press the smaller end of the bushing into the window of the rear cover.

STATOR COVER

STATOR

Fig. 10-23

REAR COVER

Fig. 10-24

Fig. 10-25

- 47 -