Sun Microsystems 2000E installation manual Installing the Supply, Preparation

2

2.5.2Installing the Supply

2.5.2.1Preparation

1.Remove the power supply compartment EMI panel Part No. 340-3134-xx covering both power supplies. See Figure 2-3.

Remove twelve 10-32 screws securing the panel in place and set aside.

Screws

Figure 2-3Removing the Power Supply Compartment EMI Panel

2.Disconnect the top power supply power cord.

This is in the lower-center of the top supply. See Figure 2-4.

Power Supply Installation 2-5