Sun Microsystems 2000E installation manual Removing the EMI Shield, 3Removing the Side Panels

A

3.Lift the panel up until free of the tabs at the top of the chassis. Set the panel aside.

Panel notches

Chassis tabs

Side panel

Captive screws

Figure 1-3Removing the Side Panels

A.1.4 Removing the EMI Shield

The EMI shield is located behind the front panels.

1.Remove the Phillips screws securing the EMI shield to the chassis. See Figure 1-4.

2.Grab the handle at the panel top to tilt the panel out to remove it.

A-4 SPARCserver 2000E Power Supply Installation Manual—April 1995