Disassembling the Slide Rails Before Installation

Use this procedure to remove the mounting brackets from the slide-rail assemblies.

1.Unpack the slide-rails.

2.Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown in FIGURE 1-1.

3.Squeeze and hold the tabs at the top and bottom of the lock while you pull the

mounting bracket out of the slide-rail assembly, until it reaches the stop. See FIGURE 1-1.

4.Pull the mounting bracket release button toward the front of the mounting bracket, as shown in FIGURE 1-1, and simultaneously withdraw the mounting bracket from the slide-rail assembly.

5.Repeat the procedure for the remaining slide rail assembly.

Mounting bracket release button

Slide-rail lock

FIGURE 1-1Disassembling the Slide-Rail Before Installation

Chapter 1 Setting Up the Server Hardware 3

Page 11
Image 11
Sun Microsystems X4200 M2, X4100 M2 manual Disassembling the Slide Rails Before Installation, Unpack the slide-rails