Installation Worksheet
Use the worksheet in TABLE 1 to gather the information you need to configure the preinstalled Solaris 10 OS. You need to collect only the information that applies to your application.
TABLE 1 Worksheet for Installation
|
|
| Your Answers: | |
|
|
| Defaults are noted | |
Information for Installation | Description or Example | with an asterisk. (*) | ||
|
|
|
| |
Language |
| Choose from the list of available languages for the | English* | |
|
| Solaris 10 software. |
| |
|
|
|
| |
Locale |
| Choose your geographic region from the list of available | English (C - | |
|
| locales. | ASCII)* | |
|
|
|
| |
Terminal |
| Choose the type of terminal that you are using from the |
| |
|
| list of available terminal types. |
| |
|
|
| ||
Network connection | Is the system connected to a network? | • Networked | ||
|
|
| • | |
|
|
|
| |
DHCP |
| Can the system use Dynamic Host Configuration | • Yes | |
|
| Protocol (DHCP) to configure its network interfaces? | • No* | |
|
|
|
| |
If you are not | IP address | If you are not using DHCP, supply the IP address for the |
| |
using DHCP, |
| system. |
| |
note the network |
| Example: 129.200.9.1 |
| |
address: |
|
|
| |
Subnet | If you are not using DHCP, is the system part of a | 255.255.0.0* | ||
| ||||
|
| subnet? |
| |
|
| If yes, what is the netmask of the subnet? |
| |
|
| Example: 255.255.0.0 |
| |
|
|
|
| |
| IPv6 | Do you want to enable IPv6 on this machine? | • Yes | |
|
|
| • No* | |
|
|
|
| |
Host name |
| A host name that you choose for the system. |
| |
|
|
|
| |
Kerberos |
| Do you want to configure Kerberos security on this | • Yes | |
|
| machine? If yes, gather the following information: | • No* | |
|
| Default Realm: |
| |
|
| Administration Server: |
| |
|
| First KDC: |
| |
|
| (Optional) Additional KDCs: |
| |
|
|
|
| |
32 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide • May 2007
