Sun Microsystems X4200 M2, X4100 M2 Continue with “Powering On and Off the Server” on page

5.If desired, connect an RJ-45 serial port cable to the “SERIAL MGT” connector. Note the following considerations for the serial port and serial port cabling:

■The default serial port speed is 9600 baud with no flow control.

■These servers use the same pinout as the RJ45 port on the RSC/ALOM/ALOM Plus cards on Sun Netra™ and other Sun Fire systems.

■There is a compatible Sun RJ45-to-DB9 adapter shipped with the server, part number 530-3100.

■An alternative, compatible cable is the Cisco 72-3383-01 console cable.

6.Continue with “Powering On and Off the Server” on page 16.

Chapter 1 Setting Up the Server Hardware 15