Sunbeam 2386 Operating Instructions, About The Speed Control Dial, Burst Of Power¨, Head Lock

The dough hook with the small washer and foot goes into the socket on the side of the mixer nearest the side of the bowl. The other dough hook with the large washer goes into the socket nearest the center of the bowl. See the dough hook symbols located on the bottom of the mixer head.

BEATER-BOWL DRIVE ADJUSTMENT

Automatic bowl rotation is factory set. Occasionally, a simple adjustment may be necessary when the bowl fails to rotate.

To make this adjustment, tilt the mixer head back. Hold the mixer head in an upright position and locate the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw clockwise, to lower the mixer head; or counter clockwise, to raise the mixer head. Retighten the locking nut. The beater with the nylon button should lightly touch the bottom of the mixing bowl.

Adjustment	Locking
Screw	Nut

OPERATING INSTRUCTIONS

ABOUT THE SPEED CONTROL DIAL

The speed control dial is used for turning the mixer ON and OFF

and for selecting its 12 mixing speeds.

Rotate the speed control dial in a clockwise direction to increase mixing speed; and in a counter-clockwise direction to decrease mixing speed.

As you rotate the speed control dial, notice that a numbered speed

is aligned with the indicator on top of the mixer head. This numbered speed indicates the speed at which the mixer is operating.

Rotate the speed control dial until

the indicator is opposite the numbered speed you wish to use.

Speed

Indicator

Speed Control

Dial

Mixing

Guide

BURST OF POWER¨

Press down on button or top handle to automatically increase the beater speed by 150 RPM for an immediate boost of power.

HEAD LOCK

The head lock feature locks the mixing head in the down position for added control while mixing and locks it in the up position for added convenience while cleaning. To unlock, press down the button on the side of the stand. To lock, lower mixing head until it automatically locks in place.

7