Sunbeam 2369, 2388, 2368, 2386, 2367 Caring For Your Mixer, Ejecting the Beaters or Dough Hooks

CARING FOR YOUR MIXER

Ejecting the Beaters or Dough Hooks

After you’ve finished mixing, turn the speed control dial to OFF and unplug the electric cord from the electrical outlet. Push the ejector button located near the handle to remove beaters or dough hooks.

Scrape excess batter off the beaters using a rubber or plastic spatula. Do not strike beaters on the rim of the bowl.

CLEANING YOUR MIXER

To clean the mixer, wipe the mixer head, stand and turntable with a damp cloth, then dry. DO NOT IMMERSE THE MIXER HEAD OR STAND IN WATER. Avoid the use of abrasive cleaners, as they may mar the finish of the mixer.

Wash the beaters and bowls in hot, soapy water after each use. Rinse thoroughly and dry. Beaters and bowls may also be washed in an automatic dishwasher.

STORING YOUR MIXER

Store the mixer in a dry location, such as on a counter top or table top, or in a closet or cupboard.

Place the small mixing bowl inside the large mixing bowl with the beaters inserted into the proper sockets. Place the dough hooks in the small mixing bowl. Store the bowls on the turntable. The beaters will help hold the bowls in position. Wind the electric cord into a coil, secure it with a twist fastener.

MAINTENANCE

The motor of your stand mixer has been carefully lubricated at the factory and does not require any additional lubricant.

Other than the recommended cleaning, no further user maintenance should be necessary.

Return the mixer to the nearest Sunbeam Service Center for servicing or repairs.

9