With Tyco Solarlok connectors, different | 1. | Bare the |
|
kinds of annular contacts are used for dif- |
|
|
|
ferent conductor | 2. | Crimp the annular contact |
|
to use the right tools for these |
|
|
|
tions. The enclosed Tyco Solarlok connec- | 3. Slide the gland, the compression sleeve, |
| |
tors are equipped with annular contacts |
| and the seal onto the line |
|
for a cable |
|
|
|
enclosed seals have an internal diameter of | 4. | Engage the contact in the connector |
|
6 mm (for lines with a cladding diameter |
| housing |
|
of 5.3 to 6.2 mm) and 8 mm (for lines with |
|
|
|
|
| GB | |
a cladding diameter of 7.2 to 8.0 mm). | 5. | Screw the lock nut on | |
Make sure to use a seal that fits the clad- |
|
|
|
ding diameter of the cable used. | 6. | Tightening torque for the cable gland: |
|
|
| 1.5 Nm |
|
When installing the Tyco Solarlok connec- |
|
|
|
tors, proceed in the following order: |
|
|
|
155
