4.4Conformity and Safety Declarations
Declaration of Conformity to EU Low Voltage Directive 73/23/EEC, Appendix III B
We hereby declare that the product described below, including the required accessories, conforms to the provisions of EU Directive 73/23/EEC following 93/68/EEC:
Product |
|
| Solar Inverter |
Manufacturer |
|
| Sunways AG, Photovoltaic Technology |
|
|
| Macairestr. 3 - 5, D - 78467 Konstanz, Germany |
Type |
|
| Sunways NT 10000 |
As from manufacturing date |
|
| 15 September 2005 |
Applied standards | Standard | EN 50178, EN 60950 | |
| Title | Electronic equipment for use in power | |
|
|
| installations |
| Edition | 1998 | |
|
|
|
|
Comments
This product is a component, which is designated for the installation in a PV system and therefore only can correspond to the guidelines for end devices, machines or systems depending on where it is installed in the overall PV system. The assessment of the electrical and mechanical safety and the environmental influences (foreign bodies, moisture) must follow in the installed condition in the overall PV system. In the installed condition, the EMC characteristics of this product can change. Therefore for the overall PV system, a check of the EMC characteristics through the final product manufacturer is practical. Changes reserved. The currently valid issue is available upon request.
Constance, 13 Sept. 2005
Place, date | Roland Burkhardt, Executive Board |
160
