Sunway NT 10000 user manual 161

Declaration of Conformity to EMC Directive 89/336/EEC, Including Changes 91/263/EEC

and 93/68/EEC

We hereby declare that the product described below conforms to the provisions of EU Directive 89/336/EEC (EMC Directive with changes 91/263/EEC and 93/68/EEC):

Product	Solar Inverter
Manufacturer	Sunways AG, Photovoltaic Technology
	Macairestr. 3 - 5, D - 78467 Konstanz, Germany
		GB
Type	Sunways NT 10000
As from manufacturing date	15 September 2005
Applied standards	Standard EN 50082-2 (EN 61000-4-2, -4-3, -4-4, -4-6, -4-8)
	EN 55014-1; EN 55011; EN 61000-3-2;
	EN 61000-3-3; E DIN VDE 0126-1-1

Comments

The adherence to the EMC guideline presupposes an installation of the components in the system or machine, which is suitable for EMC. The installation instructions in the technical documents are to be observed. The checks follow for an installation, which is typical for the system on a measuring station, which conforms to the norms. The legal requirements for the stability and the emitted interference, limit values and norms are listed in the documentation named above. The Sunways products are intended for the installation in a PV system. The check results are not transferable in all cases to the installed condition in the PV system. This declaration therefore does not contain the assurance of EMC characteristics of the final product. Changes reser- ved. The currently valid issue is available upon request.

Constance, 13 Sept. 2005

Place, date Roland Burkhardt, Executive Board

161