
· Allocation of the cable terminal block:
Pin allocation | Sensor pin name |
sensor connector |
|
Pin 1 | Plus signal temperature |
Pin 2 | Plus signal insolation intensity |
Pin 3 | Plus connection supply +5 V |
Pin 4 | Earth reference |
·Use a small screwdriver. Press the orange terminal. The terminal will open.
·Insert the (at least 11 mm bare) cable into the respective terminal hole.
·Release the pressure from the screw- driver. The cable is now attached to the connection.
·Make sure the cable is connected tightly.
Solar inverter pin name
V+
V-
121