Tamron TS690R Control Panel Outputs, Remote Keypads & TS700.LECs, Using the CPA6 Printer, Using the DATAC / RS232 Printer, DTR, Relay, Parity, = None, = Normal, Baud rate

TS690R Installation Manual

Connecting a Printer

The TS690R supports two type of printers, the CPA6 printer (no longer available) and any standard RS232 printer. When using an RS232 printer a DCI/MPA printer adapter will be required. Menvier Security supply a DATAC printer kit which consists of a portable RS232 printer, charger unit and DCI/MPA adapter.

	FEED
	PAPER
	R
	POWE
	DATAIN
Connect to JP1	6P
PRINTER	CPA
	CPA6 Printer

RS232 Data

MPA

or DCI

Connect to JP1 1

PRINTER

DATAC or RS232 printer

System Installation

Programmable Outputs

The TS690R has many programmable outputs which can be used to drive relays, LED’s etc. Each output can be programmed for a different function, see "Programmable Output Types" on page 24.

Control Panel Outputs

The control panel has three programmable outputs:

[1-] Switched -ve output rated at 100mA.

[2-] Switched -ve output rated at 100mA.

[3-] Switched -ve output rated at 100mA.

Remote Keypads & TS700.LECs

Each remote keypad and TS700 LEC has one programmable output:

[O/P] Switched -ve output rated at 100mA.

Figure 13. Printer Connections

Using the CPA6 Printer

1.Plug the CPA6 printer directly on to the PRINTER plug (JP1) on the main control panel PCB.

2.The printer will printout a header, when finished the system event log can be printed.

3.When finished unplug the printer.

Using the DATAC / RS232 Printer

1.Plug the DCI/MPA on to the PRINTER plug (JP1) on the main control panel PCB.

2.Plug the other end of the DCI/MPA into the DATAC or RS232 printer.

3.In order for the printer to work correctly ensure the printer is set to the following:

Baud rate	= 4800
Parity	= None
Stop bits	= 2
Data bits	= 8
DTR	= Normal

4.When set-up correctly the system event log can be printed.

5.When finished unplug the MPA/DCI.

Aux 12 V		Relay available from
	Diode (IN418)
		RS components
		P/No. 346-946.
-ve O/P	Relay	Capable of switching
		mains voltages
(Programmed as Alarm / Bell / etc)
Aux 12V
		1K0 Ohm Resistor
		LED (Light Emiting Diode)

-Ve O/P

Aux 12V

12V Buzzer

RS Part No. 245-051

-Ve O/P

Figure 14. Output Examples

19