TS690R Installation Manual

Engineer’s Menu 1

 

 

Add/Cancel Devices [1.A]

This option allows the engineer to add and remove wirefree detectors to and from the system.

Adding Devices

Devices are added to the system as follows:

1.Ensure that "E/MENU 1" is selected.

2.Press [A] to select the add/cancel devices option.

3.Press [A] to add a new device.

4.The display will prompt you to enter the device number (01 - 30). Enter the device number and press [ENT].

5.The display will sow "SHOW LED", align the activity LED of the detector or remote setting device with the learn sensor on the main PCB (top right hand corner).

6.Trigger the detector by operating the tamper or pressing a button on the remote setting device.

7.The activity LED flashes and transmits a unique identity code to the learn sensor. The control panel will give a rising multi-tone sound and the display will show the device type learnt:

8.FOB = 502r watch pendant FIRE = 509r smoke detector PIR = 515r PIR

KEY FOB = 525r remote setting device DOOR CON = 535r universal transmitter

9.Press [ENT] to continue. If required, repeat from step 3 for other devices or press [ESC] to leave this programming option.

☞If you enter a device number that is currently being used by another detector the display shows "* IN USE*" when selecting the device at step 4.

☞If you try to learn the same device twice the display will show "*ON SYS*" when triggering the detector at step 6.

E / MENU 1

A

ADD / CANX

A= Add devices

DEV ? --

Enter the device number 01 - 30.

SHOW LED

Align the detector LED

with the learn sensor on the control panel and trigger the detector by activating the tamper.

FOB

FIRE

PIR

KEY FOB

DOOR CON

The display will show the type of device learnt

Add devices Flowchart

Removing Detectors

Devices are added to the system as follows:

1.Ensure that "E/MENU 1" is selected.

33