Codec C90
Contents | Introduction | Getting started | About the menus |
Administrator Guide
| AdminAbout. Settingsthe settingsmenu | Settings Library | Cameras | Appendices | Contact us |
|
|
|
|
|
|
Administrator settings
The Administrator settings menu lets the user configure the IP settings and the system settings.
The IP Settings menu
The IP Settings are found in the IP Settings menu as well as in the Advanced Configuration menu in the Network settings.
Changes in the administrator settings may ! affect the behavior of the system and should
be configured by the system administrator.
Each setting is explained in the 
administrator The settings library section.
Navigate in the menus
Use the remote control to navigate in the menus:
•Use the arrows down/up to select a menu item
•Use the arrow right to expand the selection
•Use the arrow left to go one step back
Change a value
•Select a value from a drop down list and press the OK button to save, or press the left arrow to leave without saving.
•Enter a value/text in a value/text field. Press Save to save the change or Cancel to leave without saving.
HOME
SETTINGS
If IP Assignment is set to DHCP the IP address, Subnet Mask and Gateway will automatically be assigned to the codec from the DHCP server.
IP SETTINGS
DHCP
ADMINISTRATOR SETTINGS
IP SETTINGS
Static
In this guide we will concentrate on what’s behind the Administrator Settings menu and leave the other menus to be explained in the Codec C90 User Guide.
You can download the Codec C90 User
Guide from our web site.
Go to: 
http://www.tandberg.com/docs
Changes in the administrator settings may ! affect the behavior of the system and should
be configured by the system administrator.
If IP Assignment is set to Static the IP address, Subnet Mask and Gateway must be defined manually:
•On the remote control, press the arrow down key to highlight an address field. Enter the IP address, Subnet Mask and Gateway address.
•Press OK to confirm the new value or Left arrow to cancel.
17 |
