TANDBERG D14129.02 manual Connecting the camera, Hdmi cable, HD-SDI cable, Hdmi to DVI-D adapter

VISCA™ is a trademark of Sony Corporation

Codec C90

ContentsIntroduction

Connecting the camera

The HDMI and HD-SDI can be used simultaneously.

HDMI cable

The HDMI cable delivered with the camera is 5 meters.

Maximum length is 15 meter with a category 2 certified good quality HDMI cable.

HD-SDI cable

The HD-SDI cable must be purchased separately. The maximum recommendable length of HD SDI cable is 100 m.

HDMI to DVI-D adapter

Administrator Guide

Getting started About the menus About the settings Settings Library Camerasa eras Appendices Contact us

HD-SDI socket

The HDMI to DVI-D adapter is used when connecting to a TANDBERG MXP codec or TANDBERG Video Switch

Power supply connection is NOT needed when the camera is used with a TANDBERG Codec.

HDMI and HD-SDI

can be used simultaneously.

Connect the camera control cable, RJ45 to RS-232. Visca™ protocol is supported.

Connecting HDMI HD Video out on camera to HDMI 1 In on the Codec.

If you need to connect the camera to a TANDBERG Video Switch or to a system with a DVI-D socket, use the enclosed HDMI to DVI-D adapter.

D14129.02—NOVEMBER 2008 35