Codec C90
Contents | Introduction | Getting started | About the menus | About the settings | Settings Library |
Administrator Guide
| Camerasa eras | Appendices | Contact us |
|
|
|
|
Cameras in daisy chain
A single daisy chain can have up to seven cameras.
Cascaded cameras
The sockets named Extra Camera and Power In are used when connecting cameras in daisy chain.
•HDMI and
•Power. The first camera in the chain is powered up from the codec by the VISCA camera control cable. Additional cameras must use the 12V DC Power in.
•Extra camera cable. The daisy chained cameras are connected by using the VISCA Extra Camera cable between the Extra Camera In and Codec Control In sockets
Example. Four daisy chained TANDBERG PrecisionHD 1080p cameras.
| Power in | Power in | Power in |
| 12V DC | 12V DC | 12V DC |
Main | Second | Third | Fourth |
camera | camera | camera | camera |
Connect to the | Connect to the | Connect to the | Connect to the | Connect to the |
Camera Control | Video Input 1 | Video Input 2 | Video Input 3 | Video Input 4 |
socket on the | on the codec | on the codec | on the codec | on the codec |
Codec. When used |
|
|
|
|
with TANDBERG |
|
|
|
|
Codecs, this first |
|
|
|
|
camera will need |
|
|
|
|
no power supply |
|
|
|
|
connected. |
|
|
| VISCA™ is a trademark of Sony Corporation |
38 |
