D14129.02—NOVEMBER 2008 37
Codec C90 Administrator Guide
Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us
Cameras
This section describes the v ideo output formats for the TANDB ERG
PrecisionHD 1080p camera.
DIP switch settings for video output formats
The video output format for the ca mera is set by DIP switches. Th e
DIP switches are found on the bottom si de of the camera.
The default setting is Auto. When us ing HDMI, the video output fo rmat
is automatically detected. See the ta ble to the right.
Maximum resolution for HDM I is 1080p60.
Maximum resolution for HD -SDI is 1080p30.
Line voltage frequency
The camera will automaticall y detect the line voltage freq uency when it
is 50 or 60 Hz. You may set the video output format to a specific value
(use the DIP switches) to overrid e the auto frequency detecti on, if a
different line voltage freq uency is an issue.
DIP Switch table for video f ormats
12345 HDMI HD-SDI
00000 Auto
00001 1920x1080p25 1920x1080p25
00010 1920x1080p30 1920x1080p30
00011 1920x1080p50 1280x720p50
00100 1920x1080p60 1280x720p6 0
00101 1280x720 p25 1280x 720p25
00110 1280x720 p30 1280 x720p30
00111 1280x720 p50 1280 x720p50
01000 1280x720 p60 1280 x720p6 0
0 1 0 0 1 Software control
The DIP switch
1
0
The table shows the different s ettings available for the H DMI and
the HD-SDI outputs.
Auto: Camera negotiates format ove r HDMI. HD-SDI tracks HDMI
and defaults to 1080p30 in absence of HD MI sync.
Software: For more on the Soft ware control setting, read about
video mode selections in the TANDBERG PrecisionHD 1080p User
Guide.
Bottom side of the TANDBERG
PrecisionHD 1080p camera