Taylor 047772-M - page 30

26 Model PH90Operating Procedures
Install the draw valve spinner assembly. Insert the
draw valve from the bottom until the slot in the draw
valve which accepts the draw handle comes into view.
(See Figure 13.)
Figure 13
Step 6
Install and lubricate the pivot pin o--ring. (See
Figure 14.)
Figure 14
Install the draw handle. With the stopping tab of the
draw handle facing down, slide the fork of the draw
handle into the slot of the draw valve. Secure the draw
handle with the pivot pin. (See Figure 15.)
Figure 15
Step 7
Install the spinner blade. Lubricate the shaft of the
spinner blade up to the groove. (See Figure 16.)
Figure 16