41
Model PH90 Operating Procedures
Step 3
Important: Install the agitator back onto the
agitator drive shafthousing. Replace the hopper
cover. (See Figure 66.)
Figure 66
Step 4
Remove the syrup lines from the freezer door.
Step 5
Return to the freezer with a small amount of cleaning
solution. With a pail below the door spout, dip the door
spout brush into the cleaning solution and brush c lean
the syrup ports in the freezer door, door spout and
bottom of the driven spinner, spinner blade, and syrup
line fittings. (See Figure 67.)
Note: To assure sanitary conditions are maintained,
brush each item for a total of 60 seconds, r epeatedly
dipping the brush in cleaning solution.
Figure 67
With the syrup port brush, brush each syrup port hole
10 to 15 times. Dip the brush in the cleaning solution
before brushing each port. (See Figure 68.)
Figure 68
Fill the squeeze bottle with cleaning solution. With a
pail beneath the door, insert the adapter end of the
squeeze bottle into the syrup port, and squeeze t he
bottle firmly. This action will force solut ion out of the
adjacent port and down around the spinner. This
procedures hould be performed for at least 10 seconds
per port. (See Figure 69.)
Figure 69