Teac P-55 instruction manual Shipping, Ribbon set

SECTION 17 : Shipping

When you need to ship the P-55, first replace the shipping materials in reverse order of removal by referring to SECTION 5 : Installing/Removing Shipping Protection Materials. Thereafter, pack the printer by referring to the illustration below.

NOTE

Shipping the P-55 without shipping protection materials replaced in place might result in damage to internal parts.

This product internally reaches a high temperature when in use. Before installing the shipping protection materials in the unit, leave it turned off for a while (1 hour) to cool it off completely.

Make sure the ink ribbon and transfer ribbon are removed when the shipping protection materials are installed in the unit.

Do not apply shock to either the unit or ribbons in shipment.

AC power cable

(For U.S.A.

and Canada)

Printer cable

Ribbon set

AC power cable

(For Europe)

Utility Software CD-ROM

and Label print sample

Blank media (CD-R)

"Before Getting Started"

*Note Cleaning Kit

P-55

*Note: The cleaning kit is optional.

54