SECTION 14 : Getting Label Print Job Started
3) Correcting for aspect ratio
1)Place a medium on the tray and click Print next to Aspect ratio on the Maintenance tab.
2) The
*The first test pattern is printed as shown on the left.
3)Take out the medium from the disc tray. Then, with the medium rotated counterclockwise by 90 degrees, place the medium back into the tray so that the two black printed areas on the medium are set toward the printer side and aligned horizontally
as shown by the arrows.
*Move the medium to the right as shown by the red thin arrows to bring the hold pins located into the center of the tray into contact with the left side of the center spindle hole of the medium.
4) Click Repeat on the Maintenance tab.
43
