2Getting Set Up

8.Select your printer and click on OK.

9.The driver software you need is automatically installed.

10.Assign the printer to a port:

a.Select the printer from the list of installed printers.

b.Choose the Connect button to display the Connect dialog box.

c.Set the Transmission Retry value to 995. Refer to your Windows documentation for details.

d.Select a port:

Interface

Select

Parallel

LPT1 or LPT2

Serial

COM1 or COM2

Network

Network button

If you selected a parallel port, go on to step e.

If you selected a serial port, click on the Settings button to open the Settings dialog box. Fill in each item according to your configuration, then click on OK. Refer to your Windows documentation for details or ask your network administrator for help.

If you clicked on the Network button, the Printers – Network Connections dialog box appears. Fill in each item according to your configuration. Refer to your Windows documentation for details or ask your network administrator for help.

Note The printer’s configuration page contains the information you need to set up the printer port. For information on generating a configuration page, see “Generating the configuration page” on page 6-13.

e.Click on OK in the Connect dialog box and close the Printers dialog box.

2-24Phaser 220i and Phaser 220e Color Printers

Page 36
Image 36
Tektronix 220i, 220e user manual Interface Select, LPT1 or LPT2, COM1 or COM2, Network button