Tektronix 220e, 220i user manual Install the transfer roll

Getting Set Up 2

Install the transfer roll

Note ColorCoat transfer rolls are used with common laser paper; black and 3-color transfer rolls are used with Tektronix transparencies, thermal-transfer paper, and perforated premium laser paper.

With the top cover still open, install the transfer roll:

1.Remove the transfer roll from the box. Remove the shipping foam from the transfer roll. Remove the foam clip from the full end of the roll.

2.Hold the transfer roll so that the black band on the roll is on your left.

3.With the black band on the roll to your left, place the empty end of the roll in the slots at the front of the printer.

4.Place the full end of the roll in the slots at the back of the printer.

5.Turn the full end of the roll to remove slack.

6.Close the cover.

5

4

2 3

8869-19

User Manual 2-7