Supplies 5

Removing a used transfer roll

Note Negative images of all prints remain on the used transfer roll. If this is a security risk, dispose of the used transfer roll properly.

Every time you replace a transfer roll, you must clean three printer components. This cleaning is user care that helps ensure reliable operation and uniformly high print quality. Cleaning instructions are provided with each transfer roll. You may also refer to Chapter 4, or refer to the Phaser 220 Color Printers Cleaning Instructions that come with each cleaning kit.

1.Push the button and open the printer's top cover.

2.Lift out the back spool of the used transfer roll.

3.Lift out the front spool of the used transfer roll.

4.To install the new transfer roll, follow the instructions on the sheet that comes with each transfer roll, or refer to “Install the transfer roll” on page 2-7.

1

2

8869-17

User Manual

5-7

Page 79
Image 79
Tektronix 220e, 220i user manual Removing a used transfer roll