80A03 TekConnectProbe Interface Module Instruction Manual 1
Getting Started
The 80A03 TekConnectProbe Interface Module is an adapter that allows you to
use TekConnectprobes with CSA8000 and TDS8000 Series sampling oscillo-
scopes and 80E0X samplingmodules. The interface is comprised of an enclosure
that houses a compartmentfor one 80E0X electrical sampling module and two
TekConnectprobe inputs. The interface connects to the sampling oscilloscope
through a permanentlyattached 1 meter extender cable.
Figure1: The80A03 TekConnect Probe Interface Module
The 80A03 TekConnectProbe Interface Module also allows you the flexibility of
using the interfaceas a general-purpose sampling module extender cable by
simply disconnecting theshort semi-rigid cables on the front panel of the
interfaceand using the sampling module inputs directly.
The TekConnectProbe Interface Module supports probe interface conversion
between CSA8000 and TDS8000 Series samplingoscilloscopes and the
following TekConnectprobes.
SupportedTekConnect probes Dynamic Range
P7225
P7240
P7260
P7330
P7350
P7350SMA
Asreported on the probe label
P7380 1.5 Vpk-pk (5X), 6 Vpk-pk (25X)1
P7380SMA 1V
pk-pk (2.5X), 5 Vpk-pk (12.5X)1
1Thisdiffers from theprobe label. See the probe labelfor actual limits.