80A03 TekConnectProbe Interface Module Instruction Manual iii
General Safety SummaryReview the following safety precautions t o avoid injury and prevent damage to
this product or anyproducts connected to it.
Toav oid potential hazards, use this product only as specified.
Only qualified personnel should perform serviceprocedures.
While using this product, you mayneed to access ot her parts of the system. Read
the General Safety Summary in other system manualsfor warnings and cautions
relatedto operating the system.
Connect andDisconnect Proper ly.Do not connect or disconnect probes or test
leads while they are connected to a volt age source.
Connect the probeoutput to the measurement instrument before connecting the
probe to the circuit undertest. Disconnect the probeinput and the probe ground
from the circuitunder test before disconnecting the probe from the measurement
instrument.
Groundt he Product. This product is indirectly grounded through the grounding
conductor of the mainframepower cord. To avoid electric shock, the grounding
conductor must beconnected to earth ground. Before making connections to the
input or output terminalsof the product, ensure that the product is properly
grounded.
ObserveAll Terminal Ratings. To avoid fire or shock hazard, observe all ratings
and markings on theproduct. Consult the product manual for further ratings
information beforemaking connections to the product.
The common terminalis at ground potential. Do not connect the common
terminal to elevated voltages.
Connect the ground leadof the probe to earth ground only.
DoNot OperateWithout Cover s. Do not operate this product with coversor panels
removed.
AvoidExposed Circuitry. Do not touch exposed connections and components
when power is present.
DoNot OperateWith Suspected Failures. If you suspect there is damage to this
product, have it inspectedby qualified service personnel.
DoNot Operatein Wet/Damp Conditions.
DoNot Operatein an Explosive Atmosphere.
KeepPr oduct Surfaces Clean and Dry.