2101 Field Wizard
Section 3 Operation
DWG
Help Key
Arrow Keys
Numeric Keys
Power Key
Enter Key
Figure 3-1 Field Wizard Keypad and Display
The keypad contains six software configured function keys (soft keys) that are used to make selections and navigate through menus. Their specific functions will depend upon what operation you are performing, and will be shown in the display window.
The four arrow keys are used for navigation. The Enter key is used to complete data entry, acknowledge prompts, and signal the start of certain operations. Numeric keys are active when numeric data is to be entered.
The key with a question mark on it is the Help key. Press it to obtain context sensitive help while using the Field Wizard. When you are in Help mode, use the directional arrow keys to scroll through the information displayed. Press the Help key again to exit the Help mode.
The Power key places the unit into an ultra low power state, during which the display window will be blank.
The Escape key is not currently used. During some operations, one of the function keys will serve as a Cancel or Exit key.
The unit is equipped with an audible beeper. The beeper acknowledges key presses, and signals errors when incorrect entries are made.
