Teledyne T703, T703U 4.5.2.2. The STANDBY Step , 4.5.2.3. The DURATION Step

Operating the Calibrator Teledyne API T703/T703U Calibrator Operation Manual
64
4.5.2.2. The STANDBY Step
The STANDBY step places the calibrator into STANDBY mode
To insert a STANDBY step into a sequence, press:
4.5.2.3. The DURATION Step
The duration step causes the T703/T703U to continue performing whatever action was
called for by the preceding step of the sequence.
 If that step put the instrument into STANDBY mode, the calibrator stays in
STANDBY mode for the period specified by the DURATION step,
 If that step put the instrument into GENERATE mode, the will continue to
GENERATE whatever calibration mixture was programmed into that step for the
period specified by the DURATION step,
To insert a DURATION step into a sequence, press:
07223C DCN6572