Teledyne T802 5.9.5. ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT

Section II Operating Instructions Teledyne API T802 Paramagnetic O2 Analyzer Operation Manual
104
5.9.5. ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT
Some analog signal recorders require that the zero signal be significantly different
from the baseline of the recorder in order to record slightly negative readings
from noise around the zero point. This can be achieved in the T802 by defining a
zero offset, a small voltage (e.g., 10% of span).
To add a zero offset to a specific analog output channel, select the ANALOG I/O
CONFIGURATION submenu (see Section 5.9.3) then press:
07275B DCN6418