Thermador Note:, You Will See, 3 . Start Timer, TIMER 1MIN––:––SEC, To Change a Timer:, 1.Select TIMER 1 or TIMER, To set TIMER 1 or TIMER 2:

Oven Operations Built-in Oven Care and Use Manual

Setting the Timer

•The oven has two Timers, which are independent of each other. Neither timer controls oven operations.

•Touch once and the Timer is set in minutes and seconds.

•Touch twice and the Timer is set in hours and minutes.

To set TIMER 1 or TIMER 2:1.Select TIMER 1 or TIMER 2.

Message scrolls in display.

2 . Set the amount of time.

(Example shows a 3-minute setting with Timer 1.)

3 . Start Timer.

4 . When set time is complete, “End” is displayed and 2 long beeps signal. When turned off, display reverts to time of day.

Note: If timer is not turned off, beeps will continue every 30 seconds. After 5 minutes, beeps stop and the display reverts to the previous time of day.

You Will See

Touch

TIMER 1MIN––:––SEC

TIMER1

			Touch TIMER 1 again for hrs and Min then
			select length of time then touch start
Touch
			3:00
3	0	0
			MIN		SEC
				TIMER1
Touch
			MIN3:00SEC
START
				TIMER1
Touch
				End
TIMER OFF
				TIMER1

To Cancel an Active Timer:Select TIMER 1 OFF or TIMER 2 OFF.To Set Both TIMER 1 and TIMER 2:

•Follow the steps above to set each Timer. The Timer with the least amount of countdown time has display priority. The countdown display for the second timer is shown automatically when the first timer has ended.

•The words “TIMER 1” and “TIMER 2” are both displayed along with the number countdown.

•The designation, “TIMER 1” or “TIMER 2” with the least remaining countdown time is more brightly lit than the other.

•During the countdown, touch CLOCK or TIMER. Depending on the pad touched, either the time of day or the remaining time is briefly displayed.

To Change a Timer:

1.Touch TIMER 1 or TIMER 2.

2.Enter the new desired time.

3.Touch the START pad.

10