Thermo Products MHA1-125N, MDA1-50N Notice to the Installer, Material and Workmanship, Packaging

Models: MDA1-100N MDA1-125N MDA1-75N MHA1-125N MHA1-50N MHA1-100N MHA1-75N MDA1-50N

1 61
Download 61 pages 24.2 Kb
Page 4
Image 4

All installations and services must be performed by qualified service personnel.

Notice to the Installer

Installation of this gas-fired furnace must be performed by a qualified installer in accordance with all local codes and authorities having jurisdiction. In the absence of local governing codes, installation shall conform to these instructions and to the regulations of the National Fuel Gas Code, ANSI Z223.1/NFPA 54-2002 and/or, National Gas and Propane Installation Codes CSA B149.1, or the latest editions thereof.

A qualified installer, also referred to in this instruction manual as a “qualified heating contractor”, is an individual, or agency, that is responsible for the installation and adjustment of the equipment. A qualified installer is properly licensed and experienced to install gas-burning equipment in accordance with all local codes and ordinances.

Any reference to L.P. or propane gas in this manual, any other label, or markings on the furnace is to be construed to be propane HD-5, a commercial grade of liquefied petroleum gases composed of a minimum of 90 percent liquid propane (C3H8).

Material and Workmanship

This furnace was built with the highest quality materials and attention to workmanship. However, omissions and defects occasionally occur. Before installing the furnace, inspect the furnace thoroughly. If missing parts, defective material, or poor workmanship are evident, report the model and serial numbers imprinted on the furnace rating label to the seller.

Packaging

This is a complete, factory-assembled furnace contained within one package. However, certain parts, including, air filter(s), air filter rack(s), the venting system must be assembled to the furnace, in the field.

Shipping Damage

If this furnace was damaged during transit, please immediately request the transportation company inspect the furnace and issue a concealed damage report. The party receiving the furnace should file the claim for shipping damage. Report any shipping damage immediately.

1

Page 4
Image 4
Thermo Products MHA1-125N, MDA1-50N, MHA1-75N Notice to the Installer, Material and Workmanship, Packaging, Shipping Damage