TOA Electronics 20.6. Storing or Recalling Parameters Set at the Unit

20.6. Storing or Recalling Parameters Set at the Unit

You can back up the parameters set at the unit to your PC, or transfer the parameters stored in your PC to the unit.

Step 1. Double-click the "MaintCtrl.exe" icon to run the 9000 series maintenance software.

The screen at right is displayed.

Step 2. Click the "Parameter file" button.

The window at right opens.

Tip

You can also set the communication port and speed here when pressing the "Option" button on the menu bar to select "Communication Setting."

Step 3. Click the "9000 to PC" button when storing parameters set at the unit to your PC, while click the "PC to 9000" button to transfer parameters stored in your PC to the unit.

The window at right opens.

2

3

Step 4. Perform the following key operations at the unit to permit data transmission/reception between the unit and the PC.

4-1.Turn the power switch off.

4-2.Press the Input channel 8 selection key, Enter key, and Power switch at the same time. The unit is placed in standby mode for communications with the PC.

INPUT SELECT
1
2
3
4
5	INPUT VOLUME	OUTPUT VOLUME	PARAMETER	UTILITY	POWER
	ON/OFF	ON/OFF	MEMORY
6			ENTER
7		OUTPUT SEL		ESC/BACK
8

Input channel 8 selection key Enter key Power switch

110