20.8. Activating the Control Input
You can simulate the unit's control input activation through PC operation.
Step 1.
The screen at right is displayed.
Step 2. Click the "Others" button.
The window at right opens.
3
Step 3. Click the "Virtual control" tab. The window at right opens.
Terminal 1 – 12 represent the control input terminal numbers.
Step 4. Tick the "Enable" boxes of the control inputs you want to activate, then select either ON or OFF.
5
Step 5. Click the "Action" button.
The Control inputs set to ON are activated.
Step 6. Click the "Exit" button to terminate the program.
The screen returns to the initial menu screen in Step 1.
2
6
114