13.5. Audio Output Name Setting

13.5.1. Setting flow chart

The screen display examples shown below may differ from actual displays.

The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents to be selected with the Parameter setting knob, input channel selection key or other designated keys. The indications of the [], [], [], and [] arrows represent that the screen is switched with the Screen shift key.

Use the Parameter setting knob for each parameter selection.

Normal use state

MEMORY

UTILITY

Press for over 2 seconds.

PARAMETER

Setting menu screen

 

 

 

Output channel selection

 

OUTPUT SEL

 

 

Output channel 1 name setting

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

O U T P U T – S E T T I N G

 

 

 

S E L E C T O U T P U T C H

 

 

 

 

O U T 1 – _ _ _ _ _ _ _

 

 

 

 

 

 

 

 

When the 1-channel output operation is selected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ESC/BACK

 

 

 

 

for the operation method, only Output channel 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT SEL

can be set. The name setting screen for Output

 

 

 

 

 

 

 

 

 

 

 

 

channel 2 does not appear.

 

 

 

Note

 

 

 

 

Output channel 2 name setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O U T 2 – _ _ _ _ _ _ _

 

 

 

 

Any output channel name setting screen can

 

 

 

 

 

 

 

 

 

 

 

 

 

 

return to the output channel selection screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

using the Escape/Back key.

 

 

 

 

 

OUTPUT SEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(For the channel on which the T-001T is used)

Output channel 3 name setting

O U T 3 – _ _ _ _ _ _ _

OUTPUT SEL

OUTPUT SEL

Output channel 8 name setting

O U T 8 – _ _ _ _ _ _ _

OUTPUT SEL

13.5.2. Audio output setting items

Output channel name setting

Output channel 1 name setting

O U T 1 – _ _ _ _ _ _ _

The flashing portion is the cursor position for entering channel name characters.

Select a character from the alphanumeric character list by rotating the Parameter setting knob, then move the cursor with the Right shift key.

Entering a new name overwrites the existing name, if there is.

To delete the character, select [ _ ] (under-bar) with the Parameter setting knob. Space cannot be entered. Up to 7 characters can be used to set the name.

Even when an output channel name has been set, some setting screens display the channel number, not the set name.

Setting Range 7 characters (default setting: OUT1 – 8)

45