[When the function is set to REMOTE:]

(C26) Remote controller type setting

R E M O T E 1 V O L U M E

Set the type of remote controller connected to the remote control input terminals.

Use the Left and Right shift keys to move the setting items on the screen.

Setting Range

Remote Volume

REMOTE 1, REMOTE 2

 

 

Terminal Number

 

 

 

 

 

 

 

Controller type

OFF (default), VOLUME, ZM-9001, ZM-9002

 

 

 

 

• OFF:

Select this setting when no remote controller is connected.

•VOLUME: Select this setting when a normal variable resistor or variable DC power supply unit is connected.

•ZM-9001: Select this setting when the ZM-9001 is connected. This setting adds 6 control inputs.These inputs are assigned the functions in the setting screens on p.55-C1,48-B5,49-B10,and 50-B12.

•ZM-9002: Select this setting when the ZM-9002 is connected. This setting adds 4 control inputs and 1 remote volume control. These inputs are assigned the functions in the setting screens on p.55- C1, 48-B5,49-B10,and 50-B12.

(C27)

Remote-controlled channel setting (when the remote controller type is set to VOLUME or ZM-9002)

R E M O T E 1 O U T P U T 1

Select the input or output channel of which volume you want to remotely control by using the control input terminals on the rear panel or ZM-9002's volume control.

The REMOTE 1 on the screen represents the REMT VOL 1 of control input terminal, and the REMOTE 2 represents the REMT VOL 2.

Use the Left and Right shift keys to move the setting items on the screen.

Setting Range

Remote Volume

REMOTE 1, REMOTE 2

 

Terminal Number

 

 

 

 

 

Remote-controlled

OFF, INPUT 1 – 8, OUTPUT 1 – 2, Max. OUTPUT 8 when T-001Ts

 

channel

are used

 

 

(default for REMOTE 1: OUTPUT 1, REMOTE 2: OUTPUT 2)

 

 

 

(C28) Volume-controlled signal setting

(when the remote controller type is set to VOLUME or ZM-9002, and the remote-controlled channel to the output channel)

V A L I D F O R A L L

Select signals of which volume you want to remotely control.

Setting Range

 

ALL (default), BGM ONLY

 

 

 

• ALL:

Adjusts signals on all output channels by means of the connected remote volume control.

•BGM ONLY: Adjusts signals (BGM) on the output channel with Priority 8 by means of the connected remote volume control.

61