9.1.3. Changing the input volume

Step 1. Press the Input channel selection key to choose the input channel for which you want to change the volume from those with the illuminated Input channel ON/OFF indicator (channel number).

The selected channel's selection indicator (red dot) lights, and the channel name and volume level are displayed on the VFD screen.

Step 2. Adjust the volume using the input volume control.

Tip

Whether the changed volume is saved or not depends on the setting item "Memory erasure or storage" in the UTILITY setting on page 59-C21.

Step 3. After completing adjustments, press the Memory key.

The channel selection indicator extinguishes and the on-screen indication disappears.

Note

You cannot perform the Utility key operation as long as any indication is displayed in the upper line of the VFD screen.

To enter the Utility setting, delete the on-screen indication by pressing the Memory key.

When "SAVE" is selected for the "Memory erasure or storage setting" item in the UTILITY setting on page 59-C21, the changed input volume is saved by pressing the Memory key.

Again, do not forget to press the Memory key in this step.

9.1.4. Changing the output volume

Step 1. Press the Output channel selection key to turn on the Output channel selection indicator (red dot) for the output channel for which you want to change volume.

Channels to be selected will change each time the Output channel selection key is pressed. The channel name and volume level are displayed on the VFD screen.

Step 2. Adjust the volume using the output volume control.

Tip

Whether the changed volume is saved or not depends on the setting item "Memory erasure or storage" in the UTILITY setting on page 59-C21.

Step 3. After completing adjustments, press the Memory key.

The channel selection indicator extinguishes and the on-screen indication disappears.

Note

You cannot perform the Utility key operation as long as any indication is displayed in the upper line of the VFD screen.

To enter the Utility setting, delete the on-screen indication by pressing the Memory key.

When "SAVE" is selected for the "Memory erasure or storage setting" item in the UTILITY setting on page 59-C21, the changed input volume is saved by pressing the Memory key.

Again, do not forget to press the Memory key in this step.

9.1.5. Input channel ON/OFF

Input channels alternate between ON and OFF with each depression of the Input channel ON/OFF key. The channel is ON when the input channel ON/OFF indicator (channel number) lights.

In the normal matrix operation, when an input channel is OFF, the Event including the input channel such as BGM or priority broadcast will not be activated, or cancelled if the Event is in progress.

9.1.6. Output channel ON/OFF

Output channels alternate between ON and OFF with each depression of the Output channel ON/OFF key. The channel is ON when the Output channel ON/OFF indicator (channel number) lights.

In the normal matrix operation, when an output channel is OFF, no output goes through on the channel and the Event will not be cancelled.

29