13.6.2. Event setting items
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
(B1) Event number selection
E V E N T 0 1 N O N E
Event number
Setting Range 01 – 32 (default: 01)
(B2) Event classification setting
E V E N T 0 1 N O N E
|
|
|
|
|
|
|
|
|
|
|
|
|
| Event classification | |
|
|
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
| |||
Setting Range | NONE (default), ROUTE, BGM END, BASE | ||||||
|
|
|
|
|
| ||
• NONE: | Invalidates the selected Event. | ||||||
• ROUTE: | Sets broadcast patterns consisting of input/output, trigger, and other settings. | ||||||
• BGM END: Used to perform settings for terminating all Events to which inputs with priority 8 are assigned.
• BASE: | Groups broadcast patters which have been set to "Priority 8 Input with Trigger set to NONE " in |
| Classification ROUTE, so that they may be activated with a single trigger. This classification is |
| normally used to set the Event of BGM broadcasts. |
Note: Screens that appear when the Up or Down shift key is pressed differ depending on the Event classification settings.
(B3) Input channel setting (when Event classification is set to ROUTE)
E V E N T 0 1 I N 1
Input channel name
Set the input channel using the Input channel selection key.
The name of the set input channel is displayed on the screen.
One input channel can be set per Event.
Setting Range IN1 – 8 (default: IN1)
47