10. PAGING WHILE POWER IS OFF
The 9000 Series amplifiers are designed to initiate paging by way of the
The unit operates as follows when the power is switched OFF:
•Events*1 by control input (including the
•The unit returns to
•Broadcasts can be initiated from the
•Broadcasts cannot be performed for 2 seconds during which the Event is activated and the power amplifier begins to operate.
•When the power is switched OFF while an Event*1 is being activated by way of the control input with the power ON, even if the Event*1 is still left activated, the
Controls to be performed during power-OFF
The power switch located on the amplifier front panel is a
The following controls can be performed when the power is OFF.
•Remote power control by control input
Power can be switched on and off using the external contact.
•Event*1 activation by control input
Turns on the unit's power and activates the assigned Event
•Paging by the
Turns on the unit's power. The unit returns to
*1 The Event activation applies in the normal matrix operation. Take it as "Input channel ON" in the
*2 The state that the front
33