(A5) Pre-paging tone ON/OFF setting (when the ZP-001T is used)

P R E P A G E T O N E – O F F

Set whether or not to sound a one-tone chime before paging.

Setting Range ON, OFF (default)

When set to OFF, the tone does not sound at the paging telephone, either.

(A6) Operation mode setting (when the ZP-001T is used)

M O D E = P A G I N G P O R T

Select the method of activating paging.

Setting Range PAGING PORT (default), RING SIGNAL

•PAGING PORT: Paging is operated if a start signal (no-voltage make signal) is received from the paging port when the connection between the unit and PABX is established.

•RING SIGNAL: Paging is operated if an IR signal is received when the connection between the unit and PABX is established. The ZP-001T module functions as a telephone.

(A7) ANC operation ON/OFF setting (when the AN-001T is used and ANC operation is set to ACTIVE)

A N C A C T I V E

Set the ANC operation (p. 27) on or off.

Setting Range ACTIVE, BYPASS (default)

•ACTIVE: Activates the ANC function.

•BYPASS: ANC function does not work.

(A8) ANC-activated output setting (when the AN-001T is used and ANC operation is set to ACTIVE)

A N C A P P L I E S O U T 1

Set on which output channel the ANC function works.

Setting Range OUT1 – 2, Max. 8 when T-001Ts are used (default: OUT1)

(A9) Monitor ON/OFF setting (when the AN-001T is used and ANC operation is set to ACTIVE)

M O N I T O R O U T – O F F

Set to ON or OFF the monitor function that permits the ambient noise input signal to be output.

Setting Range ON, OFF (default)

•ON: Outputs signals to be monitored.

•OFF: Does not output signals to be monitored.

(A10) Monitor output channel selection

(when the AN-001T is used, the ANC operation is ACTIVE, and the Monitor function is ON)

M O N I T O R O U T – O U T 1

Select the output channel on which signals to be monitored are output.

Setting Range OUT1 – 2, Max. 8 when T-001Ts are used (default: OUT1)

43