Topcom 6000 manual Solution

SOLUTION

•Reset the base station by pressing the key on the back of the base station and try to register again.

•Make sure the power supply is properly connected to the charging cradle and that the power is on.

•Make sure the batteries are correctly fitted into the handset. Reset the base station and try to register again.

•Make sure that the power supply is properly connected to

on the base station and that the power is on.

•Move closer to the base station.

•Register the handset.

•Make sure the power supply is properly connected to on the base station and that the power is on.

•Connect the power adapter of the charging cradle to an active power outlet.

•Place the handset correctly in the charging cradle.

•Check the position of the batteries.

•Set your Skype status to online.

•Increase the ringer volume.

•Move closer to the base station.

•For more advanced functionality descriptions you should consult the User Manual found at www.topcom.net/userguides.php.

E N G L I S H

T R O U B L E S H O O T I N G 37