7.5UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display. Press this button to scroll through the parameters.
LCD Message | Description |
O/P VOLT= xxx.xV | Shows Output AC Voltage |
O/P FREQ= xx.x Hz | Shows Output Frequency |
I/P VOL T= xxx.xV | Shows Input AC Voltage |
I/P FREQ= xx.x Hz | Shows Input Frequency |
BAT VOLT= xx.xV | Shows Battery Voltage |
O/P LOAD%= xx% | Shows Load % of Max Load |
O/P W= xW | Shows Output Watts |
O/P VA= xVA | Shows Output VA |
O/P CURR= xA | Shows Output Current |
BACKUP TIME= xx min | Shows Estimated Backup Time in Minutes |
BAT CHARG= xx% | Shows Approximate Percentage of Battery Capacity |
TEMPERATURE= xxC | Shows Approximate Ambient Temperature |
BAT PACK NUM= x | Shows External Battery Pack Number |
RATING = xxxxVA | Shows UPS Rating |
CPU VERSION xx.x | Shows CPU Version |
7.6UPS Configurations
1)Parameter settings may be viewed from the UPS Settings display.
2)To enter the configuration mode, press and hold the Function button for one second. The first configuration parameter will be shown on the LCD display.
3)Press the Function button again to scroll through the remaining parameters.
24
