Toshiba 350, 450 manual 247

Adding Paper to the Large Capacity Feeder (Optional)

1 Pull out the large capacity feeder carefully until it comes to a stop.

2 Set paper aligned in tray (A) and tray (B).

-Place paper face up.

-Maximum number of sheets that can be set. "Acceptable Copy

Paper Types and Sizes" Page 36

-Fan the paper well, then set it for (A) to the right side, and set it for (B) to the left side. (The paper can be set neatly if you pile up the paper little by little alternately in the tray (A) and (B).) Be sure that the centre lever is not open. (Refer to the labels attached in the large capacity feeder.)

-Do not add paper above the line indicated on the guide.

-Paper starts being fed from the elevator tray (A) at first, and when it runs out, the paper on the tray (B) moves to the position (A).

-Do not use creased, folded, wrinkled or damp sheets of paper.

(A)

(B)

3 Push the drawer of the large capacity feeder straight into the equipment until it comes to a stop.

-Close it completely. The elevator tray automatically moves up to the paper feeding position.

Be careful not to let your fingers be caught when closing the drawer.

This could injure you.

12

247