Toshiba 450, 350 manual Set the paper size, Place the originals

3.SELECTING FINISHING MODES (Cont.)

3

84

2 Set the paper size.

- For drawer feeding "Manual Paper Selection" Page 68, step 3

-For bypass feeding "Bypass Copying on Standard Size Paper" Page 58, step 4

3 Place the original(s).

-"2.SETTING ORIGINALS" Page 45

-When placing originals in the reversing automatic document feeder (optional), set them by referring to the order of previous pages in the illustrations.

-When placing them on the glass, place the first page of the originals first if the [MAGAZINE SORT] or the [MAGAZINE SORT & SADDLE STITCH] is selected. If the [SADDLE STITCH] is selected, set them in the order of pages 12-1, (2-11), 10-3 (4-9), then 8-5, (6-7) by referring to the illustration above as an example.

4 Press the Finisher button on the basic menu as shown in the illustration on the right (highlighted).

5 Press the [MAGAZINE SORT] (or [MAGAZINE SORT & SADDLE STITCH] or [SADDLE STITCH]) button.

When the saddle stitch mode is used for A3, B4 and LD size, that is, when the [MAGAZINE SORT & SADDLE STITCH] button or the [SADDLE STITCH] button is selected, raise the stopper of the saddle stitch tray.

zSelect other copy modes as required.

6 Press the [START] button.

- When placing original(s) on the glass, follow steps 5 to 6 on page "When Coming Across the Situations below" Page 53.

3.SETTING OF BASIC COPY MODES