| 4 Replacement Procedures | |
Figures |
|
|
Figure 4.1 | Removing the Battery Pack | |
Figure 4.2 | Removing the main HDD door | |
Figure 4.3 | Removing the main HDD plate | |
Figure 4.4 | Removing the 2nd HDD door | |
Figure 4.5 | Removing the 2nd HDD brackets and plate | |
Figure 4.6 | Removing the RAM door | |
Figure 4.7 | Removing the RAM from connector | |
Figure 4.8 | Removing the WLAN card | |
Figure 4.9 | Removing the modem card | |
Figure 4.10 | Removing the FM Tuner | |
Figure 4.11 | Removing the ODD Bay module | |
Figure 4.12 | Removing the bracket from the ODD drive | |
Figure 4.13 | Removing the keyboard cover | |
Figure 4.14 | Removing screws from the keyboard | |
Figure 4.15 | Removing the keyboard | |
Figure 4.16 | Removing the screws from the bottom of the laptop | |
Figure 4.17 | Removing five screws from the laptop | |
Figure 4.18 | Detaching cables from the laptop | |
Figure 4.19 | Removing the power board | |
Figure 4.20 | Removing the speakers | |
Figure 4.21 | Removing the screws from the touch pad bracket | |
Figure 4.22 | Removing the touch pad brackets, LED board and finger printer board | |
Figure 4.23 | Removing the thermal fan from the logic lower assembly | |
Figure 4.24 | Removing motherboard from logic lower assembly | |
Figure 4.25 | Installing the | |
Figure 4.26 | Removing the UWB module | |
Figure 4.27 | Removing the Robson module | |
Figure 4.28 | Removing the VGA Board | |
Figure 4.29 | Removing the spring screws | |
Figure 4.30 | Reapply the Shinetsu 7726 grease on the thermal module and remove the release | |
| papers |
Satellite A350 Maintenance Manual |