Error! Style not defined. Error! Style not defined. | 4 Replacement Procedures |
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails.
3.Place the HDD pack on a flat surface such as a desk.
4.To separate the plate from the HDD, remove four M3x3 screws.
M3X3＊4
Figure 4.3 Removing the main HDD plate
CAUTION: Do not apply pressure to the top or bottom of the drive.
5.To remove the 2nd HDD, remove two M2.5x4 HDD door screws that secure the HDD and then remove the HDD door.
6.Remove the HDD pack by pulling on the tab attached to the pack.
Satellite A350 Maintenance Manual |
