2 Troubleshooting Procedures
This section describes how to determine if the computer’s internal optical drive is functioning properly. The Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual Maintenance Manual module bays can accommodate the following optical drives:
DVD SuperMulti supporting
Figure 2-9 outlines the process. Perform the steps below starting with Procedure 1 and continue with the other procedures as required.
Procedure 1: Audio CD test
Procedure 2: Drive cleaning check
Procedure 3: Software check
Procedure 4: Diagnostic test
Procedure 5: Connection and replacement check
Procedure 1 Audio CD check
First, insert an audio CD into the CD/DVD drive. If it works, the problem is not with the drive. Go to Procedure 3. If the audio CD does not work, go to Procedure 2. If the CD/DVD LED on the front panel does not light when the disc is played and the drive gives no response, go straight to Procedure 3.
Procedure 2 Drive cleaning check
Insert a CD/DVD
Procedure 3 | Software check |
Ensure that the appropriate driver has been installed on the computer for the CD/DVD drive.
Procedure 4 | Diagnostic test |
The audio test program stored in the Diagnostics Disk will test the drive’s ability to play an audio CD. See Chapter 3 for details.
If any errors occur while executing the diagnostic program, go to Procedure 5.
Satellite A350, SATEGO A350, EQUIUM A350 Series Maintenance Manual
29
