Toshiba e-studio 550/650/810 Inserter Mode Optional, Paper Acceptable to Set in the Inserter

6. INSERTER MODE (OPTIONAL)

When you want to insert paper or use the staple or the hole punch functions without making copies, place the paper of the same size and direction in the optional inserter.

-If the sheets of paper are fed from more than one paper source (Drawer, External LCF, Bypass guide, Inserter), set them all in the same size and direction.

Paper Acceptable to Set in the Inserter
Paper size		A3, A4, A4-R, B4, B5, FOLIO, LD, LG, LT, LT-R, COMP
Paper type		Plain paper (60 - 80g/m2), Thick paper (more than 80 - 256g/m2), Recycled paper,
		Special paper (OHP film, Color paper, Hole punch paper, etc.)
		(Ask your authorized Toshiba dealer for the details of acceptable special papers.)
Maximum		60 - 80g/m2 : 100 sheets
capacity		more than 80 - 256g/m2 : Loading height 16mm or less
		(Special paper 7mm or less)
* The above paper may not be acceptable due to paper quality, etc.
* When the paper set in the inserter is used for the staple or the saddle stitch, it is specified respectively.
- Staple	Page 6-5
- Saddle stitch		Page 6-7
		6

Setting Paper

1 Place the paper in the inserter (optional) and align the slides to its size.

-Place paper in face up.

-For paper with a different top and bottom, place it in the same direction as that of original.

-Place the paper so that it does not extend beyond the line of indication shown on the slides.

-When placing large paper, extend the tray as shown on the right.

Slide

6-9