Toshiba e-studio 550/650/810 manual ADD Paper Symbol, Tray B, Close the cover of the tandem LCF

2. ADD PAPER SYMBOL (Cont.)

Adding Paper to the Tandem LCF (Large Capacity Feeder)

1 Pull the tandem LCF out carefully until it comes to a stop.

- Be careful not to touch the drawer slide rail.

	Open some packages of paper, take out entire reams
	2 of paper and set them aligned in tray A	and tray B .
	- When setting the paper, set the paper for A to the right side,
	and set it for B to the left side. (The paper can be set neatly if
	you pile it up gradually and alternately in trays A and B .) Be
	sure that the centre lever is not open ( refer to the labels
	attached in the tandem LCF ).
	- Up to 2500 sheets of paper (80g/m2) can be set.
	- Paper starts being fed from the elevator tray	A at first, and
	when it runs out of paper, the paper on tray B	moves to the
	position A .
	- Set the paper so that it does not protrude beyond the line of
	indication shown on the rear guide plate.
	- Do not use creased, folded, wrinkled or damp sheets of
7	paper.
	- Be careful not to touch the drawer slide rail.

A

B

MAX

Slide rail

3 Close the cover of the tandem LCF.

- Close the drawer completely.The elevator tray automatically moves up to the paper feeding position.

Be careful not to let your fingers be caught when closing the drawer.

7-4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL