Toshiba e-studio 550/650/810 manual Preface

PREFACE

Thank you for purchasing the Toshiba Digital Copier e-STUDIO550/650/810. This Operator’s Manual describes the following:

•how to use the digital copier

•how to inspect and carry out maintenance on the digital copier

•how to remedy mechanical and copying problems

Before using the digital copier, thoroughly read and understand this Operator’s Manual. To ensure that clean copies are made at all times and to keep your digital copier in optimum working order, this Operator’s Manual should be readily available for future reference.

To ensure correct and safe use of the Toshiba Digital Copier e-STUDIO550/650/810, this Operator’s Manual describes safety precautions according to the following three levels of warning:

Before reading this Operator’s Manual, you should fully understand the meaning and importance of these signal words.

Warning ...	Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
	injury, or serious damage, or fire in the equipment or surrounding assets.
Caution ....	Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
	injury, partial damage of the equipment or surrounding assets, or loss of data.
Note	Indicates a procedure you should follow to ensure the optimal performance of the digital copier
	and problem-free copying.
Tip	Describes handy information that is useful to know when operating the digital copier.
Advice	Describes an operation you should follow to keep the digital copier in good working order.

Warning

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

1.Do not touch the connector terminal when disconnecting the cables of peripheral equipment.

2.Before opening any covers or removing any units from the copier, discharge the static electricity from your body by touching a metal part of the copier.

This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-marking is TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany. e-mail : customerservice@toshibatec-tgis.com

COPYRIGHT 2002

TOSHIBA TEC CORPORATION

3